Field Monitoring Service

• Ambient Air Quality Monitoring - We carry out the Ambient Air Quality Monitoring with a purpose of compliance of Air Quality Standards to evaluate the impacts of Existing Air Pollution sources.
• Stack Monitoring - It refers to the monitoring of pollutant emissions from Industry stacks. The purpose of stack monitoring is to extract sample from the stack or duct which is representative of emissions from that stack or duct during a time period under a desired operation condition.
• There are two types of Stack Monitoring :
• Flue Gas Stack - A flue-gas stack is a type of chimney, a vertical pipe, channel or similar structure through which combustion product gases called flue gases are exhausted to the outside air.
• Process Gas Stack -It is a type of chimney through which gases arising out of various chemical reactions inside the Industrial plant are exhausted.
• Work Place Monitoring - Personal samplers or Handy samplers of adequate and appropriate design are available with us which have adequate capacity to carryout Industrial Hygiene surveys and exposure to fugitive emissions.
• Lux Monitoring - It refers to the continuous light measurement in the production areas.
• Meteorological Monitoring - We have several on-line data-loggers for weather data collection as well as manual weather data collection equipment. These equipment include Wind Vane, Wind Anemometer, Dry & Wet Thermometer, Max. & Min. Thermometer, Rain gauge, Barometer and SODAR.
• Waste Water Sampling - We collect the samples by two Methods:
• Grab Sampling - Collection of the sample at a particular time and place can represent only the composition of the source at that time and place. This involves manual sampling and minimal equipment.
• Composite Sampling - It refers to physically mixing of individual samples to form a composite sample.
• Water Sampling - Water sampling and analysis involves the collection of water samples and measurements for chemical, biological characteristics to determine its quality.
• Soil Sampling - Core cutters are used to collect surface soil samples. Before stated sampling the upper most soil layer is removed to prevent mix garbage or dust. Then original or clear soil is collected in core cutter up to the depth of about 1 to 2 feet.